Skip to article frontmatterSkip to article content
Site not loading correctly?

This may be due to an incorrect BASE_URL configuration. See the MyST Documentation for reference.

SFP_PANDA_SYNC - Synchronize data between 2 PandAs

Fields

NameTypeDescription
IN.SYNC_RESETwrite actionLocal reset
IN.LINKUPreadGTX link status
IN.BIT1bit_outSFP panda sync bit 1 input
IN.BIT2bit_outSFP panda sync bit 2 input
IN.BIT3bit_outSFP panda sync bit 3 input
IN.BIT4bit_outSFP panda sync bit 4 input
IN.BIT5bit_outSFP panda sync bit 5 input
IN.BIT6bit_outSFP panda sync bit 6 input
IN.BIT7bit_outSFP panda sync bit 7 input
IN.BIT8bit_outSFP panda sync bit 8 input
IN.POS1pos_outSFP panda sync pos 1 input
IN.POS2pos_outSFP panda sync pos 2 input
IN.POS3pos_outSFP panda sync pos 3 input
IN.POS4pos_outSFP panda sync pos 4 input
IN.HEALTHread enumError status
IN.ERR_CNTread uintNumber of not-in-table or disparity errors
OUT.MGT_RESETwrite actionMGT hard reset
OUT.BIT1bit_muxSFP panda sync bit 1 output
OUT.BIT2bit_muxSFP panda sync bit 2 output
OUT.BIT3bit_muxSFP panda sync bit 3 output
OUT.BIT4bit_muxSFP panda sync bit 4 output
OUT.BIT5bit_muxSFP panda sync bit 5 output
OUT.BIT6bit_muxSFP panda sync bit 6 output
OUT.BIT7bit_muxSFP panda sync bit 7 output
OUT.BIT8bit_muxSFP panda sync bit 8 output
OUT.POS1pos_muxSFP panda sync pos 1 output
OUT.POS2pos_muxSFP panda sync pos 2 output
OUT.POS3pos_muxSFP panda sync pos 3 output
OUT.POS4pos_muxSFP panda sync pos 4 output
PandABlocks-FPGA
SFP_LOOPBACK- SFP Loopback Module
PandABlocks-FPGA
SFP_UDPONTRIG - SFP UDP on trig Module