FMC_24V - FMC 24V IO Module

Fields

The module has bee splits into two blocks: The inputs and the outputs.

Name	Type	Description
IN.FMC_PRSNT	read enum	FMC present 0 FMC Disconnected 1 FMC Connected 2 FMC_PRSNT not supported
IN.VTSEL	param enum	Input Voltage Select 0 5V 1 24V
IN.DB	param enum	Input Debounce Time Select 0 None 1 0.024ms 2 0.75ms 3 3ms
IN.VAL1	bit_out	24V Input-1
IN.VAL2	bit_out	24V Input-2
IN.VAL3	bit_out	24V Input-3
IN.VAL4	bit_out	24V Input-4
IN.VAL5	bit_out	24V Input-5
IN.VAL6	bit_out	24V Input-6
IN.VAL7	bit_out	24V Input-7
IN.VAL8	bit_out	24V Input-8
IN.FAULT	read	Input Voltage and Temp Alarm (Active Low)
OUT.FMC_PRSNT	read enum	FMC present 0 FMC Disconnected 1 FMC Connected 2 FMC_PRSNT not supported
OUT.VAL1	bit_mux	24V Output-1
OUT.VAL2	bit_mux	24V Output-2
OUT.VAL3	bit_mux	24V Output-3
OUT.VAL4	bit_mux	24V Output-4
OUT.VAL5	bit_mux	24V Output-5
OUT.VAL6	bit_mux	24V Output-6
OUT.VAL7	bit_mux	24V Output-7
OUT.VAL8	bit_mux	24V Output-8
OUT.PWR_ON	param enum	Enable Output Power 0 Off 1 On
OUT.PUSHPL	param enum	Output Global Push-Pull/High-Side Select 0 High-side 1 Push-pull
OUT.FLTR	param enum	Output Glitch Filter Enable 0 Off 1 On
OUT.SRIAL	param enum	Output Serial/Parallel Select 0 Parallel 1 Serial
OUT.EN	param enum	Output Enable 0 Disable 1 Enable
OUT.CONFIG	param	Output Raw Configuration Value
OUT.FAULT	read	Output Global Fault Output
OUT.STATUS	read	Output Raw Status Value